Whitfield Advantage II-T, III & Plus Control Board: 12055902
This controller will also work for part # 12155912, a controller used on the Avantage II-T, Advantage III, Advantage PLUS, and the Quest PLUS that came with auto-ignition.
*** Important: This board does not have the 4-pin connector at the bottom needed to supply power to the ignitor)***
This controller will work for all Whitfield Advantage versions WP3, WP4, and WP5
NOTE: the 1/4" spade connections on the bottom of the controller are for the TSTAT connection. If you are not using a TSTAT you need to connect these two spade together with a jumper wire or connect your wiring harness yellow wires and connect those together at the the TSTAT bridge.
NOTE: If your old controller had a red slide knob and black a dial on the face, you will need an adaptor cable to make this board work with your stove. The part number for the cable is 12025901 and has been an obsolete part for some time.
Replacement For Part Numbers:
- 12055902
- 12155912
- 12155900
- 12025912
- 12155900R
- 12025902
View Compatible Models