You are here: Home > Lennox > Montage
...
Sort By:
Page of 1
Bushing Auger, 12051100
Price: $5.99

Replacement upper brass auger bushing (Oilite) for Whitfield pellet stoves: Replaces part #12050110
  • Advantage I - WP2
  • Advantage II - WP2
  • Advantage II-T - WP2
  • Advantage III - WP2
  • Cascade - WP5
  • Legend - WP1
  • Prodigy I - WP3
  • Prodigy II - WP3
  • Montage 32 FS
  • Gasket, Combustion Fan (Quick Disconnect) #61050016
    Gasket, Combustion Fan (Quick Disconnect) #61050016
    Price: $9.99

    This gasket that connects between the housing and the combustion fan. Lennox Whitfield part # 61050016
    This gasket will fit in:
    Quest Plus FS - WP4,
    Profile 20,
    Profile 30,
    Advantage Plus Insert,
    Advantage Plus FS,
    Advantage 2-T-C-WP2,
    Advantage 2-T-WP2,
    Bella
    Montage (Flue Outlet Gasket)
    Vacuum Line 12", H5898
    Price: $9.99

    Fits the following stoves: Montage 32FS, PI/PS40
    Anderol 465 Synthetic Bearing Oil PP5400
    Anderol 465 Synthetic Bearing Oil. PP5400
    Price: $14.99

    Required by Fasco for all of their high service temperature motors that have oil port. But good for all types of pellet and wood stove parts. The use of petroleum based oils may cause premature bearing failure on your motors. This is not a petroleum based oil so this meets that standard.
    Burn Pot Scraper for Montage by Lennox
    Burn Pot Scraper for Montage by Lennox. montage-scraper
    Price: $14.99

    This tool is used to scrap the ash in the burn pot. This scraper is for the Montage model made by Lennox.
    Auger Tube End Cap Gasket, H7074
    Price: $17.99

    Auger Tube End Cap Gasket for the Lennox Montage 32FS
    Whitfield High Limit 250 degree Snap Switch #12147705
    Whitfield High Limit 250 degree Snap Switch #12147705
    Price: $34.99

    This is a high limit disc which opens on temperature rise to break a circuit if temperatures rise above 250 degrees. This part is compatible for: Advantage I, Advantage 2-T, Advantage 2-T-C, Advantage Plus FS, Advantage Plus Insert, Optima, Profile 20, Profile 30 FS, Profile 30 Insert, Traditions T300P, Montage 32F.
    Whitfield Pressure Switch, by Lennox  # 16050001
    Whitfield Pressure Switch, by Lennox # 16050001
    Price: $89.99

    Whitfield Pressure Switch, by Lennox  # 16050001
    Fits with: Optima, Advantage Plus FS, Advantage Plus Insert, Profile 20, Profile 30, Profile 30 Insert, Quest Plus Insert, T300P, Montage
    Kwik Fire After market replacement Igniter for Whitfield and Lennox stoves (PP3500). Replaces item #'s 12150213 & H8127
    Kwik Fire After market replacement Igniter for Whitfield and Lennox stoves. Replaces item #'s 12150213 & H8127. PP3500
    Price: $104.99

    Kwik Fire After market replacement igniter for Whitfield and Lennox stoves. Replaces item #'s 12150213 & H8127 6 month limited warranty. Save $30.
    Lennox: Cascade, Montage.
    Whitfield: Advantage 2-T-C, Advantage 2-T, Advantage Plus FS, Advantage Plus Insert, Optima, Profile 20, Profile 30, Profile 30 Insert, Quest Plus FS-WP4, Quest Plus Insert- WP4, Traditions T300P.
    Ignitor Cart. Heater w/t Fuse #H8127 Replaces Item #12150213
    Ignitor Cart. Heater w/t Fuse. H8127
    Price: $129.99

    This ignitor can be used on the following Lennox products: Montage, Optima, Advantage 2-T-WP2, Advantage 2-T-C-WP2, Advantage Plus FS, Profile 20, Profile 30, Profile 30 Insert, Quest Plus FS-WP4, Quest Plus Insert - WP4, Traditions T300P.

    ******Ignitor Cart. Heater w/t Fuse #H8127 Replaces Item #12150213 and 12140213
    Winslow Country Stove Auger Motor for the PI/PS40 # H5886
    Winslow Country Stove Auger Moto, by Lennox # H5886
    Price: $129.99

    Auger Motor for the Winslow Country Stove PI/PS40
    Refractory Panel #H7054, Montage 32FS Freestanding Pellet Stove
    Refractory Panel Montage 32FS Freestanding Pellet Stove. H7054
    Price: $129.99

    Refractory Panel #H7054, Montage 32FS Freestanding Pellet Stove
    lennox remote, two button, timer, on/off or timer mode h8660
    lennox remote, two button, timer, on/off or timer mode H8860
    List Price: $199.99
    Price: $149.99
    Sale Price: $149.99
    You save $50.00!

    lennox remote, two button, timer, on/off or timer mode

    for stoves: bella, montage, winslow f.s. winslow insert

    Log Set for the Whitfield Profile 20 Pellet Stove
    Log Set for the Whitfield Profile 20 Pellet Stove & Montage 32FS, by Lennox #H0244
    Price: $179.99

    Also Can be Used In the Lennox Montage 32FS.
    Whitfield: Profile 20
    H8861 RCS-Stat remote control
    Lennox Remote RC-S-STAT part # H8861
    List Price: $279.99
    Price: $199.99
    Sale Price: $199.99
    You save $80.00!

    Remote RC-S-STAT - LCD Stat, Thermostat, On/Off part # H8861 C

    Montage Combustion Fan Assembly, by Lennox H7310
    Montage Combustion Fan Assembly, by Lennox H7310
    Price: $229.99

    This  combustion fan assembly is compatible with the Lennox Montage pellet stove.
    Montage Convection Fan Assembly, by Lennox H7309
    Montage Convection Fan Assembly, by Lennox H7309
    Price: $229.99

    This  convection fan assembly is compatible with the Lennox Montage pellet stove.
    Cast-iron Gothic Arch Trim Kit for Montage Pellet Stove, by Lennox # H6843
    Arch Trim Kit for Montage Pellet Stove, by Lennox # H6843
    Price: $242.99

    Cast-iron Gothic Arch Trim Kit for Montage Pellet Stove, by Lennox.
    Arch Trim Kit for Montage Pellet Stove, by Lennox # H6842
    Arch Trim Kit for Montage Pellet Stove, by Lennox # H6842
    Price: $303.99

    Arch Trim Kit for Montage Pellet Stove, by Lennox.
    CONTROL BOARD FOR  MONTAGE 32 FS BY LENNOX
    CONTROL BOARD FOR MONTAGE 32 FS BY LENNOX, H7881
    Price: $369.99

    CONTROL BOARD FOR  MONTAGE 32 FS BY LENNOX
    Artisan Trim Kit for Montage Pellet Stove, by Lennox # H6841
    Artisan Trim Kit for Montage Pellet Stove, by Lennox # H6841
    Price: $425.99

    Artisan Trim Kit for Montage Pellet Stove, by Lennox # H6841
    Contemporary Trim Kit, Brushed Nickel for Montage Pellet Stove, by Lennox # H6840
    Contemporary Trim Kit, Brushed Nickel for Montage Pellet Stove, by Lennox # H6840
    Price: $486.99

    Contemporary Trim Kit, Brushed Nickel for Lennox Montage Pellet Stove